You are here

Home » Forums » MotoBikes & MotoAnything » Wrenching » 2006 Yamaha FJR1300 - KrZy8

2012-03-10 Valve Clearances, new engine

dcarver's picture
published by dcarver on Sat, 03/10/2012 - 21:37
Forums: 
2006 Yamaha FJR1300 - KrZy8

 

Specifications

Intake Exhaust
0.15 - 0.22 mm 0.18 to 0.25 mm
0.0059 - 0.0087" 0.0071 - 0.0098"

 

 

 

Truly a blind measurement. As I post this, I don't know what's in or not.. 

But here are my measured clearances..

G =Go

NG = NoGo

Intake

1-1 1-2 2-1 2-2 3-1 3-2 4-1 4-2
.18G .2 NG .18G .2 NG .18G .2NG .18G .2NG .18G .2NG .18G .2NG .18G .2NG .18G .2NG

Exhaust

1-1 1-2 2-1 2-2 3-1 3-2 4-1 4-2
.23G .25 NG .23G .25 NG .23G .25 NG .23G .25 NG .23G .25 NG .23G .25 NG .20 Tight

.20

I screwed the pooch on 4-1, 4-2 measurements. Did not get the No-Go spec.

Edit - from the FSM

Intake cold - .15 - .22 mm or .0059 - .0087"

Exhaust cold - .18 - .25 mm or .0071 - .0098"

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer